Back to article
3328
"NO SIGNAL – PRESS PLAY TO CONNECT" message displayed
This message appears when an accessory Bluetooth® or SoundLink adapter is selected as the music source but no signal is present. To resolve this, try the following:
Plug the USB key in first before turning the system on.
If the system is turned set to the Computer source without the USB key plugged in yet, it will show “NO SIGNAL – PRESS PLAY TO CONNECT” on the display. This means it has timed out before establishing a signal with the USB Key. This timeout only takes 20 seconds. The best order to turn on the system and prevent this from happening:
- Plug in the USB Key into a working USB outlet on the computer
- Once the USB Key is on, turn on the system and press the "SoundLink" button to select the Computer source
- Open the desired audio playback program on the computer
Try manually pairing the SoundLink USB key to the SoundLink adapter
To ensure the SoundLink USB key is seeing the adapters unique id, try manually pairing the USB key to the adapter. For more information on how to manually pair the USB key to the adapter, see Re-linking the SoundLink USB key to your system
Which adapter is connected?
The Wave system will display "CONNECTING" then "NO SIGNAL – PRESS PLAY TO CONNECT" when it cannot find a wireless device. Determine which adapter is being used and make a selection below:
Wave Bluetooth Music Adapter
Wave SoundLink Adapter
Was this article helpful?
Thank you for your feedback!