Back to article
3348
Putting a system into Setup mode
Entering Setup mode lets you connect a device to the Wi-Fi network broadcast by the Bose system. This is useful for system set up and diagnostics.
To enter Setup mode:
On the back of the SoundTouch Wireless Link adapter, press-and-hold the button for about 10 seconds until the Wi-Fi status indicator light (on the front) flashes once, then then glows solid amber.
For the next steps, refer to the SoundTouch app or instructions that asked you to enter Setup mode.
For the next steps, refer to the SoundTouch app or instructions that asked you to enter Setup mode.
Was this article helpful?
Thank you for your feedback!