Back to article
3333
Programming your remote
The universal remote control for your system can control other devices, like a cable box or Blu-ray player that is connected to your product. Learn how to program the universal remote to control a connected device.
To program your remote:
- Power on both your system and the device you want to control
- On the remote control, enter Programming mode:
- For TVs, simultaneously press and hold the Program button and the TV On/Off button for three seconds until all the source buttons glow
- For cable or satellite boxes, simultaneously press and hold the Program button and the Guide button for three seconds until all the source buttons glow
- Enter the remote code for the brand of your TV or cable/satellite box. If the source buttons blink rapidly several turn off, an incorrect code was entered. Wait 10 seconds and try again
Tip: If you need the code booklet, search for and select your product at bose.com/support, then click the Downloads tab - Press the Program button, then test the code. If it does not control your device or has limited functionality, repeat these steps with the next code for the brand.
Was this article helpful?
Thank you for your feedback!