Setting an Alarm

Tip: When an alarm is enabled, the alarm time(s) displays on the right of the system display.

1. On the remote, press the Alarm Setup button: The Alarm 1 time appears on the system display and flashes on the right above SET
   Tip: If no adjustments are made within 10 seconds, the system exits alarm setup
2. Press the Time – or Time + buttons to set the alarm time, or hold the buttons to scroll faster
3. Select an alarm sound:
   Note: Devices or accessories connected to the AUX In or Bose link connections cannot be selected as an alarm sound
   • To hear the buzzer (default setting), press the Sleep (Buzzer) button
   • To hear the radio, press the Radio button, then press a a preset number button (1 - 6)
4. Pressthe Volume up or Volume down buttons to set an alarm volume
5. Press the Alarm Setup button. The Alarm 2 time appears on the system display and flashes on the right below SET
6. Repeat steps 2 - 4 to set Alarm 2
7. Press the Alarm Setup button to exit alarm setup

Note: The alarm sounds through the system speakers, even if headphones are connected.

In the Alarms section of the remote, press the 1 and/or 2 buttons to turn on or off Alarm 1 and Alarm 2. When enabled, the alarm time and the alarm number (1 or 2) appear on the right side of the system display.